1、每天清潔房內墻壁、玻璃及地臺底座，以免灰塵和漆塵積聚。

1. Clean the walls, glass, and floor base of the room every day to avoid the accumulation of dust and paint.

2、每星期清潔進風隔塵網，檢查排氣隔塵網是否有積塞，如房內氣壓無故增加時，必須更換排氣隔塵網；

2. Clean the intake dust screen every week and check if there are any accumulated plugs in the exhaust dust screen. If the air pressure in the room increases without reason, the exhaust dust screen must be replaced;

3、每工作150h應更換地臺隔塵纖維棉；

3. Replace the floor dustproof fiber cotton every 150 hours of work;

4、每工作30oh應更換進風隔塵網，

4. The intake dust screen should be replaced every 30 hours of operation,

5、每月清潔地臺水盤，并清洗燃燒器上的柴油過濾裝置；

5. Clean the platform water tray every month and clean the diesel filtration device on the burner;

6、每個季度應檢查進風和排風電動機的傳動皮帶是否松弛。

6. Every quarter, the drive belts of the intake and exhaust motors should be checked for looseness.

7、每半年應清潔整個烤漆房及地臺網，檢查循環風活門、進風及排風機軸承，檢查燃燒器的排煙通道，清潔油箱內的沉積物，清洗烤漆房水性保護膜并重新噴涂。

7. Every six months, the entire paint baking room and floor network should be cleaned, the circulating air valve, inlet and exhaust fan bearings should be checked, the smoke exhaust channel of the burner should be checked, the sediment in the oil tank should be cleaned, the water-based protective film in the paint baking room should be cleaned and re sprayed.

8、每年應清潔整個熱能轉換器，包括燃燒室及排煙通道，每年或每工作1200h應更換烤漆房頂棉。

8. The entire thermal energy converter, including the combustion chamber and exhaust duct, should be cleaned every year, and the painted roof cotton should be replaced every year or every 1200 working hours.

上一篇：噴漆房廢氣處理常見的幾種方法
下一篇：多工位焊煙凈化設備要注意什么？